illume Solar Skylights

Kimberley’s illume™ Solar Skylight is a solar-powered LED daylighting system designed as an alternative to a conventional skylight. Rather than transmitting sunlight through a roof window or reflective tube, illume uses a roof-mounted solar collector to power an LED ceiling panel that automatically changes brightness throughout the day to closely mimic the natural daylight outside.

How it Works

  • A compact solar collector is installed on the roof.
  • A low-voltage cable connects the collector to an LED ceiling panel inside the room.
  • As outdoor light levels change throughout the day, the LED panel automatically brightens or dims, creating the appearance of a skylight.
  • No batteries are required for normal daytime operation, and optional accessories are available for night-time mains-powered operation and dimming.

Light Colour

All illume models produce a cool white light with a colour temperature of approximately 6,000 K, giving a crisp daylight appearance. This colour temperature is similar to bright midday daylight and works particularly well in kitchens, bathrooms, laundries and workspaces. Some people, however, may find it cooler and less warm than traditional interior lighting or natural sunlight entering through a conventional skylight.

Choosing the Right Size

ModelRecommended areaTypical applications
180 mm RoundUp to 2 m²Toilet, pantry, walk-in robe
280 mm Round6–7 m²Laundry, small bathroom, hallway, entry
350 mm Round10–11 m²Bathroom, study, dining room
300 mm Square5–6 m²Small office, ensuite
400 mm SquareUp to 9 m²Bathroom, bedroom, small kitchen
500 mm SquareUp to 11 m²Bedroom, kitchen
600 mm SquareUp to 13 m²Kitchen, living area
700 mm SquareUp to 17 m²Large living rooms, family rooms, open-plan spaces
300 × 600 mmUp to 10 m²Hallways, kitchens
400 × 600 mmUp to 11 m²Hallways, kitchens
300 × 1200 mmUp to 20 m²Kitchen benches, long rooms
600 × 900 mmUp to 20 m²Large living areas, commercial spaces
400 × 1200 mmUp to 24 m²Large open-plan areas or commercial applications

Advantages over traditional shaft skylights

illume Solar SkylightTraditional shaft skylight
No light shaft required.Requires a light shaft from roof to ceiling.
Much smaller roof penetration – usually tucked underneath the ridge cap – reducing the likelihood of leaks.Larger roof opening with flashing and shaft construction.
No solar heat gain in summer or heat loss in winter through glazing.Can increase unwanted heat gain and heat loss through the roof opening.
Can be installed almost anywhere, including multi-storey homes, lower floors and rooms with complex roof structures.Installation is limited by roof framing and the ability to construct a shaft.
Consistent, evenly diffused illumination with no direct glare.Provides genuine natural sunlight that varies with weather, season and sun angle.
No UV entering the room, helping protect furnishings from fading.Natural sunlight includes UV unless special glazing is used.

Traditional skylight vs illume

A conventional skylight provides real sunlight, allowing you to see the sky and experience the changing quality of daylight throughout the day. It also offers the most natural colour rendering because the light is actual sunlight.

An illume, by comparison, simulates natural daylight using LEDs. While it cannot provide a view of the sky or ventilation, it offers several practical advantages:

  • simpler installation,
  • suitability for rooms where a shaft is impossible,
  • improved thermal performance,
  • reduced risk of roof leaks,
  • no condensation within a skylight shaft, and
  • consistent illumination without harsh sun patches or glare.

For homes where a conventional skylight is impractical because of roof design, multiple storeys or limited ceiling space, an illume Solar Skylight provides an effective alternative that delivers bright, daylight-like illumination without the structural complexity of a traditional skylight.

Powered by Bizetools